Our Austin-based crews carry the parts and the know-how to get your air moving again today. Same-day appointments available across Austin and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
Most repairs are completed same-visit, and we test the system before we leave to confirm it's actually holding.
Leonard HVAC didn't start as a franchise chasing volume. Our crews carry manufacturer certifications across the major residential and commercial equipment lines.
We're not interested in being the cheapest quote on the page — we're the company that tells you what actually needs fixing instead of what pads the ticket. We carry the credentials Austin inspectors and property managers expect to see, and we keep that documentation available on request for every job, residential or commercial.
We know which neighborhoods run on older ductwork and which subdivisions were built with newer high-efficiency systems. That local knowledge shapes how we diagnose problems — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Trust in this industry gets eroded fast, and it takes real consistency to earn it back. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Austin is a small enough community that reputation travels fast.
That local context saves time on every call, because we're not starting from zero on basic questions about your neighborhood or your system. It also means faster escalation when something's urgent — a local dispatcher can reroute the nearest truck in minutes, not hours.
Every service below is backed by the same licensing, warranty, and upfront pricing you get on any job we run.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Austin dispatch team prioritizes no-heat and no-cooling calls so a technician is diagnosing your system as fast as physically possible.
Once a technician is on-site, the goal is always a same-visit repair — most emergency calls in Austin get resolved in a single trip, not a multi-day back-and-forth.
Not every repair call ends in a repair — sometimes the honest recommendation is a properly sized replacement. We walk Austin homeowners through financing and rebate options where available before a single piece of equipment gets ordered.
Every install ends with a performance test, confirming airflow, temperature split, and refrigerant charge are all where they should be before we consider the job finished.
A retail floor, a restaurant kitchen, or an office suite can't run without stable climate control. Our commercial division services light industrial and warehouse ventilation across Austin, with service agreements built around your operating hours.
Property managers working with multiple Austin locations can set up a standing account so every site gets consistent service history and pricing.
Most emergency breakdowns start as a small, ignorable warning sign months earlier. Beyond standard tune-ups, we also handle indoor air quality upgrades for homes with allergy or asthma concerns for Austin households that want more than just temperature control.
We'll show you photos of anything concerning we find, along with a plain-language explanation of what it means and whether it's urgent.
This is the standard every Austin technician on our team is held to.
Details vary by job type and are always shared upfront, never buried in fine print.
Emergency dispatch never comes with a hidden surcharge sprung on you after the fact.
A technician doesn't consider the job done until the system is tested and performing correctly.
A little attention to how your system is running can save you a lot of money and discomfort.
Ignoring new noises is one of the fastest ways to turn a small repair into a major one.
This is one of the most common complaints we hear on service calls across Austin.
Gradual efficiency loss is easy to miss month to month, but it adds up fast over a season.
Short cycling puts extra wear on the compressor and shortens the system's overall lifespan.
A burning smell should never be ignored — it can indicate an electrical issue that needs immediate attention.
If you're calling about the same problem every few months, the underlying cause likely hasn't been fully addressed.
We explain diagnostic fees and repair estimates before authorizing work.
Dispatchers give you a realistic arrival window instead of a vague "sometime today".
We don't consider a job finished until the system is actually performing correctly.
We run background checks because you're letting someone into your home.
Photos and plain-language notes accompany every diagnostic.
Maintenance plan members get priority scheduling and discounted rates.
We don't write these — our customers do.
"The furnace stopped working overnight and someone was at our door before 9am. The pricing was exactly what they quoted over the phone."
"Scheduled a fall tune-up and they caught a cracked part before it became a real problem. Techs are always polite, always on time, and clean up after themselves."
"Had a full system replacement done and it was the smoothest home project I've had in years. New system is noticeably quieter and our energy bill actually dropped."
"Commercial dispatch was quick and the tech understood our system without needing to be walked through it. Kept our kitchen running through the weekend rush."
"I appreciated that they didn't try to sell me a bigger unit than I needed. Would use them again without hesitation."
"Called at 11pm during a heat wave and honestly didn't expect anyone to pick up, let alone show up. This is the company I'm saving in my phone now."
Understanding what typically fails helps homeowners know what to watch for and when a repair call is worth making before things get worse.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Before the coldest stretch of the year, a heating system benefits from a full safety inspection, checking the heat exchanger, ignition system, and airflow to catch any issue that could turn into a no-heat emergency.
Simple habits between professional visits also matter. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Whether your Austin home has a traditional split system, a ductless mini-split, a heat pump, or a hybrid dual-fuel setup, our crews are equipped to diagnose and repair it. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Here's a look at the kind of experience that shows up at your door.
Over a decade in residential heating and cooling, with a focus on load calculations and full system replacements.
Runs point on overnight and weekend emergency calls throughout Austin.
Experienced with the light industrial and retail equipment common across the area.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
Our policy is simple: you approve the number before we touch the system.
Our emergency line runs 24 hours a day, including nights, weekends, and holidays.
Yes — licensing and insurance documentation is available on request for any job, residential or commercial.
Our technicians walk you through the actual numbers — repair cost versus remaining system life versus new equipment efficiency — before making a recommendation.
Plan members typically see fewer surprise breakdowns because small issues get caught during routine visits.
We cover Austin and the surrounding communities, including the zip codes listed in our coverage section below.
Property managers and business owners can request a dedicated point of contact for ongoing service.
Our technicians are trained across the major residential and commercial equipment lines, not limited to a single manufacturer.
We understand a full system replacement is a significant expense, which is why flexible payment options exist.
Twice-yearly maintenance is the standard we recommend given the temperature swings the area sees.
Beyond basic safety checks, it's best to leave diagnosis to a licensed technician rather than attempting a repair yourself.
Our pricing is explained clearly before dispatch, and any after-hours consideration is communicated upfront — never as a surprise on the final invoice.
Straightforward fixes like a capacitor swap or a thermostat replacement are often finished in well under an hour.
For most residential visits, yes, an adult should be present to grant access and approve any quoted work.
Housing stock varies a lot across Austin — older homes often still run original ductwork that needs different care than the sealed, high-efficiency systems going into newer builds.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Austin.
We accept standard payment methods for repairs and smaller jobs, and we'll always tell you upfront what a given service is likely to cost so there's no last-minute scramble to figure out payment. If a rebate or local incentive program applies to your Austin installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
If your address falls within Austin, NV and near Austin, there's a strong chance we already service your street.
If you're on the edge of our listed zip codes, it's still worth a call, since routes and coverage get adjusted as demand shifts.
